Deck Restoration at a home in Vernon Hills on Noble Circle. 820 sq ft restored. Completed by our Northbrook team.
Completed by our Northbrook crew
Eight hundred and twenty square feet of pressure-treated pine had seen too many Lake Michigan winters without the protection it needed. The solid stain coating had given out — peeling in patches, graying where UV had worked through what was left — and beneath it the wood had started to tell the story more plainly: ten floor boards rotted through, fasteners popped up across the surface, and an old coating thick enough in places to resist stripping without a fight. This single-level deck in Vernon Hills, stairs included, had reached the point where cosmetic work alone wasn't going to cut it.
We started with a power wash using a wood cleaner and brightener to pull the dirt, grime, and surface gray before we touched a sander. The old coating's resistance meant we leaned on the sanding stage to get a surface clean enough to hold a new finish — full coverage, no shortcuts around the railings or stair treads. The ten rotted boards came out and were replaced, and we went through the deck methodically tightening loose nails, screws, and bolts before anything got coated. One coat of Benjamin Moore WoodLuxe solid stain, color-matched to the original, went down on the floor, stair treads and risers, and the top handrails. The surface came out even and well-bonded, with the structural concerns addressed underneath it.
On this Home in Vernon Hills, our Northbrook crew carried out a complete Deck Restoration across 820 of decking — from thorough surface prep and any needed repairs through to a durable, color-matched finish built to hold up to Chicago weather. Here's everything the job included:
Work performed
Showing the home's condition before our team arrived, and the result after the deck restoration was complete.
Fantastic work! Clean and final finished services are fantastic.
Proudly serving Vernon Hills and the surrounding suburbs.
Our Northbrook crew also serves these areas.
Common questions from Vernon Hills homeowners researching Deck Restoration.
For this 820 sq ft pressure-treated pine deck in Vernon Hills, the full restoration came to $5,000, which included washing, sanding, replacing 10 rotted boards, and a solid Benjamin Moore WoodLuxe re-stain on the deck surface, wood railing, and stairs. Across the Chicago North Shore area, deck restoration on a single-tier deck of this size typically runs $3,500–$6,500 depending on board replacement count, coating type, and how heavily the old finish has failed.
An 820 sq ft single-tier deck with board replacement, a full strip of a hard-to-remove old coating, sanding, and solid re-stain generally takes a crew three to four days from start to finish. Drying and cure time between the wash, prep, and stain coats adds to the overall schedule, so homeowners should plan for the deck to be out of use for about a week total.
On this project, restoration covered pressure washing, stripping the failing old coating that had bonded stubbornly to the pine, hand-sanding the entire surface, pulling and replacing popped nails and screws, swapping out 10 rotted deck boards, and finishing everything—deck field, wood railing, and stairs—with two coats of Benjamin Moore WoodLuxe Solid stain. The goal is to bring the structure back to a safe, uniform surface without tearing it down and starting over.
In most cases, yes—even a deck showing rotted boards, popped fasteners, and a completely failed finish can be restored rather than replaced, as long as the joists, beams, and posts are still structurally sound. On this job, replacing 10 boards and stripping the old coating added time and cost, but the final result was a fully refinished deck at a fraction of what new construction would have run. For a quote, call our Northbrook team at (847) 979-9299.
Served by our Northbrook office — free estimates, licensed & insured.